amp up your lighting iqamp up your lighting iqamp up your lighting iq

by:ILED     2019-12-12
Anyone confused in the lightbulb aisle (
This is most of us)
The push to know technology and energy saving is continuing to change the script for home lighting options.
The good news is that the new bulbs are much more efficient than the old ones
The school\'s incandescent lamp gives designers the freedom to go beyond standard bulbslamp-
Fixture configuration.
\"The new type of light bulb, especially the LED, makes the light-
\"Lighting designers have created a variety of lighting designs and lighting designs that they have never created before,\" said Karman Hotchkiss, executive editor of decoration magazine . \".
\"There are a lot of new shapes out there.
There are a lot of real artistic explanations for lighting, such as sparks and effects that designers can\'t create with old things
Old-fashioned incandescent lamps.
\"This is the latest entry to a changing technology: for consumers, the Big Switch has abandoned the concept of wattage, which is related to brightness, but is actually a measure of energy use.
The brightness of today\'s bulbs is measured by lumens.
To produce 800 lumens, it takes about 60 watts of old incandescent lamps.
Compact fluorescent lamp (CFLs)
Use about 15 watts to get the same brightness, LED (light-emitting diode)
It only takes about 10 watts for the bulb to reach 800 lumens.
Another major change is the use of a heat-based thermometer to measure with Kelvins instead of degrees Celsius or Fahrenheit.
The higher the heat, the cooler the color
It makes sense if you \'ve ever seen a flame and seen the blue color in the center of the overheating.
While we don\'t usually think about it in Kelvins, it\'s a more accurate way to define the relative brightness of the light source, says Joe Rey.
Barreau is a Kentucky architect and lighting designer and an educational advisor to the American Lighting Association.
If you see a light bulb marked \"daylight\", you may think of a warm afternoon light when the manufacturer indicates a colder color in the sky.
A reference point: the warm orange light of the old incandescent lamp burns at a temperature of about 2,700 K.
Packaging manufacturers are still printing wattage-
Refer to the equivalent number on the package and on the back you will now find a required \"Lighting Facts\" infobox --
Model with nutrition label
List the lumens, estimated annual energy costs, Lifetime, lighting look and energy used.
By the way, incandescent lamps have not yet been banned.
Manufacturers must change the gas they use internally to make them more efficient.
So, old 100-
72 watts; the 75-
The tile bulb is 52 watts.
LED is the most popular technology.
These bulbs were launched in 1960s, and they used to be cheap.
The intensity is limited to the red light range.
But recent developments have made it possible for bright LEDs.
Early led 21 {+s}
The color of the T century is usually blue, but now the led has multiple colors to choose from.
Because LEDs use solid
State chip technology, they can be very small in various configurations.
Easy to install under cabinet strips, for example
Lighting options, as well as lights for kicks
Hotchkiss says toe space near the floor.
Tiny LEDs can be embedded in fixtures such as the lamp itself, not the holder of the bulb.
There are even LEDs like the old ones.
Old-fashioned bulb with visible \"filament.
\"Led costs more than traditional bulbs, but lasts longer, consumes less energy, and prices are falling,\" Lei said. Barreau.
At present, the lighting designer is mainly trying the more extreme lighting possibilities of the led, such as the device to change the color.
But Hotchkiss points out that homeowners also have interesting options.
For example, GE has a C-
Bluetooth life bulb-
Enabled, can be darkened or turned off via phone app.
Those who are confused in the light --bulb aisle (
This is most of us)
The push to know technology and energy saving is continuing to change the script for home lighting options.
The good news is that the new bulbs are much more efficient than the old ones
The school\'s incandescent lamp gives designers the freedom to go beyond standard bulbslamp-
Fixture configuration.
\"The new type of light bulb, especially the LED, makes the light-
\"Lighting designers have created a variety of lighting designs and lighting designs that they have never created before,\" said Karman Hotchkiss, executive editor of decoration magazine . \".
\"There are a lot of new shapes out there.
There are a lot of real artistic explanations for lighting, such as sparks and effects that designers can\'t create with old things
Old-fashioned incandescent lamps.
\"This is the latest entry to a changing technology: for consumers, the Big Switch has abandoned the concept of wattage, which is related to brightness, but is actually a measure of energy use.
The brightness of today\'s bulbs is measured by lumens.
To produce 800 lumens, it takes about 60 watts of old incandescent lamps.
Compact fluorescent lamp (CFLs)
Use about 15 watts to get the same brightness, LED (light-emitting diode)
It only takes about 10 watts for the bulb to reach 800 lumens.
Another major change is the use of a heat-based thermometer to measure with Kelvins instead of degrees Celsius or Fahrenheit.
The higher the heat, the cooler the color
It makes sense if you \'ve ever seen a flame and seen the blue color in the center of the overheating.
While we don\'t usually think about it in Kelvins, it\'s a more accurate way to define the relative brightness of the light source, says Joe Rey.
Barreau is a Kentucky architect and lighting designer and an educational advisor to the American Lighting Association.
If you see a light bulb marked \"daylight\", you may think of a warm afternoon light when the manufacturer indicates a colder color in the sky.
A reference point: the warm orange light of the old incandescent lamp burns at a temperature of about 2,700 K.
Packaging manufacturers are still printing wattage-
Refer to the equivalent number on the package and on the back you will now find a required \"Lighting Facts\" infobox --
Model with nutrition label
List the lumens, estimated annual energy costs, life span, appearance and energy used.
By the way, incandescent lamps have not yet been banned.
Manufacturers must change the gas they use internally to make them more efficient.
So, old 100-
72 watts; the 75-
The tile bulb is 52 watts.
LED is the most popular technology.
These bulbs were launched in 1960s, and they used to be cheap.
The intensity is limited to the red light range.
But recent developments have made it possible for bright LEDs.
Early led 21 {+s}
The color of the T century is usually blue, but now the led has multiple colors to choose from.
Because LEDs use solid
State chip technology, they can be very small in various configurations.
Easy to install under cabinet strips, for example
Lighting options, as well as lights for kicks
Hotchkiss says toe space near the floor.
Tiny LEDs can be embedded in fixtures such as the lamp itself, not the holder of the bulb.
There are even LEDs like the old ones.
Old-fashioned bulb with visible \"filament.
\"Led costs more than traditional bulbs, but lasts longer, consumes less energy, and prices are falling,\" Lei said. Barreau.
At present, the lighting designer is mainly trying the more extreme lighting possibilities of the led, such as the device to change the color.
But Hotchkiss points out that homeowners also have interesting options.
For example, GE has a C-
Bluetooth life bulb-
Enabled, can be darkened or turned off via phone app.
Those who are confused in the light --bulb aisle (
This is most of us)
The push to know technology and energy saving is continuing to change the script for home lighting options.
The good news is that the new bulbs are much more efficient than the old ones
The school\'s incandescent lamp gives designers the freedom to go beyond standard bulbslamp-
Fixture configuration.
\"The new type of light bulb, especially the LED, makes the light-
\"Lighting designers have created a variety of lighting designs and lighting designs that they have never created before,\" said Karman Hotchkiss, executive editor of decoration magazine . \".
\"There are a lot of new shapes out there.
There are a lot of real artistic explanations for lighting, such as sparks and effects that designers can\'t create with old things
Old-fashioned incandescent lamps.
\"This is the latest entry to a changing technology: for consumers, the Big Switch has abandoned the concept of wattage, which is related to brightness, but is actually a measure of energy use.
The brightness of today\'s bulbs is measured by lumens.
To produce 800 lumens, it takes about 60 watts of old incandescent lamps.
Compact fluorescent lamp (CFLs)
Use about 15 watts to get the same brightness, LED (light-emitting diode)
It only takes about 10 watts for the bulb to reach 800 lumens.
Another major change is the use of a heat-based thermometer to measure with Kelvins instead of degrees Celsius or Fahrenheit.
The higher the heat, the cooler the color
It makes sense if you \'ve ever seen a flame and seen the blue color in the center of the overheating.
While we don\'t usually think about it in Kelvins, it\'s a more accurate way to define the relative brightness of the light source, says Joe Rey.
Barreau is a Kentucky architect and lighting designer and an educational advisor to the American Lighting Association.
If you see a light bulb marked \"daylight\", you may think of a warm afternoon light when the manufacturer indicates a colder color in the sky.
A reference point: the warm orange light of the old incandescent lamp burns at a temperature of about 2,700 K.
Packaging manufacturers are still printing wattage-
Refer to the equivalent number on the package and on the back you will now find a required \"Lighting Facts\" infobox --
Model with nutrition label
List the lumens, estimated annual energy costs, life span, appearance and energy used.
By the way, incandescent lamps have not yet been banned.
Manufacturers must change the gas they use internally to make them more efficient.
So, old 100-
72 watts; the 75-
The tile bulb is 52 watts.
LED is the most popular technology.
These bulbs were launched in 1960s, and they used to be cheap.
The intensity is limited to the red light range.
But recent developments have made it possible for bright LEDs.
Early led 21 {+s}
The color of the T century is usually blue, but now the led has multiple colors to choose from.
Because LEDs use solid
State chip technology, they can be very small in various configurations.
Easy to install under cabinet strips, for example
Lighting options, as well as lights for kicks
Hotchkiss says toe space near the floor.
Tiny LEDs can be embedded in fixtures such as the lamp itself, not the holder of the bulb.
There are even LEDs like the old ones.
Old-fashioned bulb with visible \"filament.
\"Led costs more than traditional bulbs, but lasts longer, consumes less energy, and prices are falling,\" Lei said. Barreau.
At present, the lighting designer is mainly trying the more extreme lighting possibilities of the led, such as the device to change the color.
But Hotchkiss points out that homeowners also have interesting options.
For example, GE has a C-
Bluetooth life bulb-
Enabled, can be darkened or turned off via phone app.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...