how to convert high beam drl to led lights

by:ILED     2020-03-16
Many automakers such as Acura/Honda, Lexus/Toyota/Scion, Dodge/Chrysler, Mazda and Subaru choose to use the high beam function as daytime running lights, this means that the same high beam light is lit dimly during the day as it only receives about 6-9V input.
This configuration will give dim yellow light to the running lights during the day, and many people choose to use the LED route.
However, replacing your daytime running lights with just one LED bulb is not as dry as it looks.
Most of the time, the LED bulb does not receive enough power, which will cause you a series of problems, such as throwing a warning message on the dashboard, flashing, partially lighting, or even not lighting at all.
Fortunately, this can be fixed with one of several R-s.
The LED daytime running lights are set up to include special decoders designed specifically for specific vehicles in the Toyota, Lexus, Honda or Acura series. While the R-
Installation configured to plug and playand-
Play, you first need to determine which settings you need if you even need. To see which R-
Set your vehicle requirements by following these stepsby-
Step troubleshoot guidelines based on the symptoms you see.
Is there a Honda or an ac song?
Symptoms: they all light up after installing LED bulbs.
However, there is a warning message on the dashboard.
Solution: You need to include the R2 settings for the resistor DRL decoder.
The resistance and harness in the R2 Configuration will eliminate the warning message on the dashboard.
Do you have a new Lexus or Toyota? Symptoms: 1. )
The Led lights up or flashes intermittently in DRL mode. 2. )
Both LEDs light up full power when the beam is on.
Solution: You need a R4 setting that includes a DRL canceller with a capacitor.
The capacitance of the R4 decoder will help stabilize the current oscillation.
Connect the decoder included in the R4 configuration to the positive line of the inventory harness to eliminate any flicker.
Before inserting the R4 decoder box, use the LED tester to determine which side of the spare socket is positive and negative.
The R4 decoder is extremely sensitive!
Do you have an old model of Lexus or Toyota? Symptoms: 1. )
When the LED bulb is installed on one side of the vehicle, the LED bulb will light up, but the inventory halogen lamp will not light up. 2. )
When the LED bulbs are mounted on both sides, none of them are lit, or only part of them are lit. 3. )
Both LEDs light up full power when the beam is on.
Solution: You need to make R1 settings using the DRL decoder.
Special decoder for connecting load resistors and special 3-in-
1 after removing the inventory bulb from the socket, use the harness in the R1 configuration.
This will ensure that the LED bulb is lit without any fault.
What if your LED bulb does not flash and does not show the bulb?
Warning messages are displayed on the dashboard?
If you\'re really lucky, cars like Scion FR
S or Dodge Chargers don\'t need any decoder at all!
Simply install the new LED daytime running light bulb and you will be refreshed.
As you can see, converting your high beam DRL to LED daytime running lights is not necessarily a frustrating experience.
As long as you follow the proper symptoms and diagnosis, you will go well to find your car.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...