low energy highlights | thes

by:ILED     2019-12-30
(Sep 4, 2010)
Q: We are installing new lighting in the kitchen and car home and would like to use the most energy efficient lights we can find.
We \'ve seen LED lights but don\'t like the dazzling light they make.
Do you have any ideas for low energy lighting?
For years we have endured the cold blue
White light projected by fluorescent lighting under the office and kitchen cabinets.
More energy.
It is more efficient than ordinary incandescent lamps, but the harsh environment is a challenge.
LED lights use less energy, but they also emit bright, sharp light, which is not conducive to the interior.
Fluorescent lamp manufacturers have introduced softer, warmer lights to meet the challenge, and now you can find LED lights with the same color
Correction was made to provide a beautiful incandescent lamp.
The connecxx has a Tapelight system designed to be easy to install and flexible around the corner, and its compact size allows for almost invisible installation using adhesive tape (no screws)
So what you see is light, not light.
You can add up to 24 Tapelight bars to one transformer to customize the length according to your own situation.
Good news on energy: a connecxx uses less than 1 watt of electricity, and the bulb is 25 times longer than a traditional incandescent lamp.
Lighting under the counter that illuminates the interior of the cabinet and lighting really builds on the design elements of any kitchen.
The kitchen, as shown in the figure, is equipped with the connecxx tapeliight system, illuminating the panel frame and the tailgate.
Lighting is a practical part to help prepare food at the counter.
Their website shows you how to install it. See tapelight. com.
Q: I bought an expensive Italian restaurant about 10 years ago and a few months later the varnish coating began to turn yellow.
The store replaced it with a set from another manufacturer, and the same thing happened.
The store is closed now.
We asked different furniture refiners that they didn\'t want to touch. A: Oil-
Paint-based paint does have a yellow trend over time, but I don\'t know why your suit changes color so uneven or drastic.
The only way you can do it is to repaint and again I am confused that your furniture repairer will not touch the job.
From the pictures you sent, the furniture looks good in shape and the lines are beautiful.
This process requires grinding the surface to make it teeth.
Then apply good quality oil
Based on the primer sealant, let it dry for 24 hours.
This will provide you with a clean, fresh surface.
Use a low gloss acrylic paint and apply both coatings to allow the drying time between the coatings.
Finish with a few layers of water-
You can choose a glossy varnish.
This won\'t be yellow.
This column is produced by Debbie Travis and Barbara Dingle. E-
Postage house2home @ debbietavis problem. com. (Sep 4, 2010)
Q: We are installing new lighting in the kitchen and car home and would like to use the most energy efficient lights we can find.
We \'ve seen LED lights but don\'t like the dazzling light they make.
Do you have any ideas for low energy lighting?
For years we have endured the cold blue
White light projected by fluorescent lighting under the office and kitchen cabinets.
More energy.
It is more efficient than ordinary incandescent lamps, but the harsh environment is a challenge.
LED lights use less energy, but they also emit bright, sharp light, which is not conducive to the interior.
Fluorescent lamp manufacturers have introduced softer, warmer lights to meet the challenge, and now you can find LED lights with the same color
Correction was made to provide a beautiful incandescent lamp.
The connecxx has a Tapelight system designed to be easy to install and flexible around the corner, and its compact size allows for almost invisible installation using adhesive tape (no screws)
So what you see is light, not light.
You can add up to 24 Tapelight bars to one transformer to customize the length according to your own situation.
Good news on energy: a connecxx uses less than 1 watt of electricity, and the bulb is 25 times longer than a traditional incandescent lamp.
Lighting under the counter that illuminates the interior of the cabinet and lighting really builds on the design elements of any kitchen.
The kitchen, as shown in the figure, is equipped with the connecxx tapeliight system, illuminating the panel frame and the tailgate.
Lighting is a practical part to help prepare food at the counter.
Their website shows you how to install it. See tapelight. com.
Q: I bought an expensive Italian restaurant about 10 years ago and a few months later the varnish coating began to turn yellow.
The store replaced it with a set from another manufacturer, and the same thing happened.
The store is closed now.
We asked different furniture refiners that they didn\'t want to touch. A: Oil-
Paint-based paint does have a yellow trend over time, but I don\'t know why your suit changes color so uneven or drastic.
The only way you can do it is to repaint and again I am confused that your furniture repairer will not touch the job.
From the pictures you sent, the furniture looks good in shape and the lines are beautiful.
This process requires grinding the surface to make it teeth.
Then apply good quality oil
Based on the primer sealant, let it dry for 24 hours.
This will provide you with a clean, fresh surface.
Use a low gloss acrylic paint and apply both coatings to allow the drying time between the coatings.
Finish with a few layers of water-
You can choose a glossy varnish.
This won\'t be yellow.
This column is produced by Debbie Travis and Barbara Dingle. E-
Postage house2home @ debbietavis problem. com. (Sep 4, 2010)
Q: We are installing new lighting in the kitchen and car home and would like to use the most energy efficient lights we can find.
We \'ve seen LED lights but don\'t like the dazzling light they make.
Do you have any ideas for low energy lighting?
For years we have endured the cold blue
White light projected by fluorescent lighting under the office and kitchen cabinets.
More energy.
It is more efficient than ordinary incandescent lamps, but the harsh environment is a challenge.
LED lights use less energy, but they also emit bright, sharp light, which is not conducive to the interior.
Fluorescent lamp manufacturers have introduced softer, warmer lights to meet the challenge, and now you can find LED lights with the same color
Correction was made to provide a beautiful incandescent lamp.
The connecxx has a Tapelight system designed to be easy to install and flexible around the corner, and its compact size allows for almost invisible installation using adhesive tape (no screws)
So what you see is light, not light.
You can add up to 24 Tapelight bars to one transformer to customize the length according to your own situation.
Good news on energy: a connecxx uses less than 1 watt of electricity, and the bulb is 25 times longer than a traditional incandescent lamp.
Lighting under the counter that illuminates the interior of the cabinet and lighting really builds on the design elements of any kitchen.
The kitchen, as shown in the figure, is equipped with the connecxx tapeliight system, illuminating the panel frame and the tailgate.
Lighting is a practical part to help prepare food at the counter.
Their website shows you how to install it. See tapelight. com.
Q: I bought an expensive Italian restaurant about 10 years ago and a few months later the varnish coating began to turn yellow.
The store replaced it with a set from another manufacturer, and the same thing happened.
The store is closed now.
We asked different furniture refiners that they didn\'t want to touch. A: Oil-
Paint-based paint does have a yellow trend over time, but I don\'t know why your suit changes color so uneven or drastic.
The only way you can do it is to repaint and again I am confused that your furniture repairer will not touch the job.
From the pictures you sent, the furniture looks good in shape and the lines are beautiful.
This process requires grinding the surface to make it teeth.
Then apply good quality oil
Based on the primer sealant, let it dry for 24 hours.
This will provide you with a clean, fresh surface.
Use a low gloss acrylic paint and apply both coatings to allow the drying time between the coatings.
Finish with a few layers of water-
You can choose a glossy varnish.
This won\'t be yellow.
This column is produced by Debbie Travis and Barbara Dingle. E-
Postage house2home @ debbietavis problem. com.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...